Licensed & Insured, in Cleveland and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Cleveland
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (216) 294-3900 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Cleveland and surrounding areas · On-site visits included · Free estimate within 24h
Cleveland Metal Roofing is a team of local certified professionals based in Cleveland. We respond quickly in Cleveland and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (216) 294-3900⭐⭐⭐⭐⭐ 4.9/5 · 230 verified Google reviews
“We wanted a metal roof on our detached garage out back but dreaded the idea of tearing off the old shingles. Cleveland Metal Roofing did a retrofit right over the top, and the crew of three knocked it out in a day and a half. Yard was spotless when they left.”
Metal Roof Over Shingles (Retrofit)
“Our old Victorian's porch roof was leaking around the flashing and I was braced for a huge bill. They came out, tracked down the problem, redid the flashing and sealed it up properly. Honest guys who didn't try to sell me a whole new roof I didn't need.”
Metal Roof Repair
“Had them put a corrugated metal roof on our barn out past the county line. Roughly 2,400 square feet and they had it done in three days flat. The panels are dead straight and the trim work is clean. Already survived a nasty windstorm without a single issue.”
Commercial & Agricultural Metal Roofing
“Standing seam on our brick colonial and it looks fantastic, those clean vertical lines completely changed the look of the house. Crew was professional and cleaned up every scrap of metal. Only minor gripe is the project ran about a week longer than quoted, but the quality was worth the wait.”
Standing Seam Metal Roofing
“Water was pouring in around our chimney every time it rained hard. They got the flashing redone and the leak is completely gone. What a relief after two other guys couldn't figure it out.”
Flashing, Chimney & Skylight Repair
“Full metal roof replacement on our ranch house, and honestly the whole thing went smoother than I expected. They tore off the old roof, replaced it with ribbed panels, and hauled away every last bit of debris. The crew even walked me through the whole job at the end.”
Metal Roof Replacement
“We went with metal shingles on our Tudor because I wanted the metal durability without losing the classic look, and it matched the style perfectly. Installation was tidy and the crew was respectful of the landscaping. Would absolutely use them again.”
Metal Shingle Roofing
“Had our brick home's old roof replaced with a new metal one. The crew was in and out in four days and left the driveway cleaner than they found it. There was a tiny scheduling hiccup at the start, but the finished roof is rock solid and I'd hire them again in a heartbeat.”
Metal Roof ReplacementReal photos of our work in Cleveland · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel install | Starting at $8/sq ft | Includes tear-off, underlayment, panels and basic flashing on a standard gable roof. |
| Standing seam install | Starting at $12/sq ft | Concealed fasteners and raised seams, priced higher on steep pitches and cut-up rooflines. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Textured panels with more layout time around valleys, dormers and chimneys. |
| Complex or large-scale job | On estimate | Multiple roof planes, steep pitch or historic detail need an on-site measurement before quoting. |
| Travel | Included | In Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Concealed-fastener panels, underlayment, and standard trim; price rises with roof pitch and complexity. |
| Mechanically seamed standing seam | Starting at $13/sq ft | Double-locked seams and concealed clips; steeper and cut-up roofs move the number up. |
| Tear-off and deck repair | On estimate | Scope depends on existing layers, sheathing condition, and access; needs an on-site look. |
| Snow guards and ice protection | On estimate | Sized to roof area and snow load; needed where the roof dumps over walks or drives. |
| Travel | Included | In Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Full tear-off, decking inspection, underlayment, and corrugated or ribbed panels installed. |
| Standing seam replacement | Starting at $14/sq ft | Hidden-fastener panels, custom flashing, and snow guards on steep or complex rooflines. |
| Stone-coated steel replacement | Starting at $12/sq ft | Tear-off, solid re-deck where needed, and granule-coated steel panels installed. |
| Complex or large-scale job | On estimate | Cut-up rooflines, multiple chimneys, and historic or HOA review need an on-site look first. |
| Travel | Included | In Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel retrofit | Starting at $7/sq ft | Includes underlayment, panels and basic trim over sound deck; pitch and layer count move the price. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed fasteners and long panel runs; cut-up rooflines and steep gables raise the number. |
| Metal shingle or stone-coated steel retrofit | Starting at $10/sq ft | Interlocking or granulated panels over existing shingles; complex valleys and hips add labor. |
| Deck repair or partial tear-off | On estimate | Soft sheathing or code layer limits need an on-site look before any number is given. |
| Travel | Included | in Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (seal, screws, small flashing) | Starting at $450 | Covers resealing penetrations, replacing backed-out screws, and small flashing fixes, with access the main cost driver. |
| Panel replacement | Starting at $650 | Includes cutting out and matching one damaged panel, with profile availability and roof pitch moving the price. |
| Flashing rebuild (chimney or skylight) | Starting at $850 | Covers full step and counter flashing rebuild, with staging and access over porches or steep gables adding cost. |
| Ice-dam damage correction | On estimate | Needs an on-site look to trace the water path, check deck condition, and correct blocked drainage. |
| Travel | Included | in Cleveland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener or flashing leak repair | Starting at $450 | Includes leak trace, water test, and replacement of failed screws or flashing; access and roof pitch move the price. |
| Seam or panel repair | Starting at $650 | Covers seam re-crimp or panel replacement; roof type and number of affected panels drive the total. |
| Ice-dam correction and eave repair | Starting at $850 | Includes eave clearing, ice-and-water shield, and ventilation check; roofline length and attic access affect cost. |
| Emergency tarping after storm | Starting at $350 | Temporary watertight cover installed same day when possible; roof size and urgency determine the rate. |
| Complex or large-scale leak repair | On estimate | Multiple leak points, historic homes, or hidden deck rot need an on-site inspection before we quote. |
| Estimate | Free | Response within 24 hours at (216) 294-3900, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (small section) | Starting at $750 | Includes roof inspection, replacement screws and washers, and labor for a single roof section. |
| Partial re-screw (one roof plane) | Starting at $1,450 | Covers one full roof plane, with count driven by loose screw total and pitch access. |
| Full-field re-screw (whole roof) | Starting at $2,800 | Replaces every fastener and washer across the panel field, laps, and perimeter. |
| Steep or multi-level access | Quoted after inspection | Adds staging, roof jacks, or harness time for steep pitches and cut-up rooflines. |
| Travel | Included | In Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Garage or shed re-roof (tear-off) | Starting at $5.50/sq ft | Includes tear-off, underlayment, standard panels, screws, closures, basic trim; price rises with pitch and deck repair. |
| Porch or carport panel roof | Starting at $6.50/sq ft | Smaller square footage and tighter access drive the per-foot rate up; includes eave ice-and-water protection. |
| Panel over existing shingles (recover) | Starting at $4.75/sq ft | Purlins or strapping over a sound shingle roof; code limits existing layers, so we verify first. |
| Barn or agricultural building | On estimate | Span, purlin condition, panel length, and access all vary too much for a per-foot number without a site visit. |
| Travel | Included | In Cleveland and surrounding Northeast Ohio communities, no separate call-out or mileage fee. |
| Estimate | Free | On-site measurement and written scope, response within 24 hours at (216) 294-3900, no obligation. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard architectural-look metal shingle | Starting at $9/sq ft | Includes tear-off, underlayment, and standard flashing on an accessible single-pitch roof; complexity and deck repair move the price. |
| Slate-look or shake-look metal shingle | Starting at $12/sq ft | Heavier profile and more layout labor; steep pitch, dormers, and historic design review in Shaker Heights add to the total. |
| Retrofit over existing shingles | Starting at $7/sq ft | Only where code allows the existing layer count; includes prep and underlayment, excludes deck repair if rot is found. |
| Complex or large-scale roof | On estimate | Cut-up rooflines, multiple chimneys, and skylights need an on-site look before any number is realistic. |
| Travel | Included | In Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel re-roof (standard pitch) | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and standard flashing on an accessible gable roof. |
| Retrofit over existing shingles | Starting at $8/sq ft | Includes code check on layer count, underlayment, and panels over a sound deck. |
| Slate or shake profile upgrade | Starting at $11/sq ft | Premium textured panels that mimic slate or cedar, priced higher than standard profiles. |
| Complex or steep-pitch roof | On estimate | Multiple valleys, dormers, and steep pitches need an on-site look before pricing. |
| Travel | Included | in Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper flat-seam or standing seam roof | Starting at $20/sq ft | Includes custom-fabricated pans, underlayment and standard flashing; steep pitch and soldered seams raise the rate. |
| Zinc or aluminum accent and trim | Starting at $18/sq ft | Covers caps, bay window pans and trim; complex historic profiles and hand fabrication move the price up. |
| Turret, bay window or porch package | On estimate | Needs an on-site look because access, staging, soldering and matching original profiles vary house to house. |
| Copper gutters and snow guards | Starting at $28/linear ft | Includes half-round copper gutter, hangers and snow guards; height and roofline complexity affect the rate. |
| Travel | Included | In Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic recoat, sound roof | Starting at $2.50/sq ft | Includes wash, minor prep, and one acrylic topcoat on rust-free panels. |
| Rust treatment and recoat | Starting at $3.25/sq ft | Adds rust converter, primer, and topcoat on panels with surface oxidation. |
| Full restoration system | Starting at $4.00/sq ft | Includes fastener replacement, seam resealing, primer, and two topcoats. |
| Commercial or large-scale job | On estimate | Square footage, roof access, and panel condition require an on-site walk. |
| Travel | Included | In Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted flashing repair | Starting at $600 | One penetration, new flashing bent in-house and water-tested before we leave. |
| Chimney re-flash | Starting at $900 | Counterflashing set into the mortar joint plus a new collar; steeper roofs cost more. |
| Skylight curb rebuild | Starting at $1,100 | Curb rebuilt, seal replaced and frame re-flashed; rotten decking priced separately. |
| Valley and dormer flashing | On estimate | Cut-up rooflines need an on-site look to measure the runs and tie-ins. |
| Travel | Included | In Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards over one entry or lower roof | Starting at $1,200 | Covers a standard run of pad or seam-mounted guards on one roof plane; height and pitch move the price. |
| Full rail system on a steep roof | Starting at $2,400 | Continuous bar retention across the eave; steeper pitches and longer runs raise the total. |
| Ice-dam ventilation and eave correction | On estimate | Needs an on-site look at attic ventilation, eave flashing, and panel detail before a number is given. |
| Complex or large-scale job | On estimate | Cut-up rooflines, multiple roof planes, and color-matched HOA profiles require a full site walk first. |
| Travel | Included | In Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, and attic check with labeled photos and a written repair recommendation |
| Minor repair (fasteners, seals, small panels) | Starting at $350 | Covers a handful of screws, washers, and re-sealing; price moves with roof height and access |
| Flashing or penetration repair | Starting at $650 | Rebuilds chimney, skylight, or vent flashing; steeper roofs and multiple penetrations raise the price |
| Partial re-roof (one slope or section) | On estimate | Needs an on-site look to count damaged panels, check deck condition, and plan staging |
| Travel | Included | in Cleveland and surrounding suburbs, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (216) 294-3900, with no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Walk-and-probe inspection with written report and photos, included when we quote repair or replacement. |
| Pre-purchase inspection | Starting at $250 | Full condition report with photos and remaining service-life estimate, priced by roof size and pitch. |
| Insurance documentation | Starting at $300 | Photo record of hail, wind and ice-dam damage formatted for a claim file, priced by roof complexity. |
| Complex or large-scale job | On estimate | Steep Victorian roofs, commercial buildings and multi-penetration scopes need an on-site look first. |
| Travel | Included | in Cleveland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (216) 294-3900, no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless K-style gutter, standard run | Starting at $9/linear ft | Includes 6-inch seamless trough, snow-rated hidden hangers, and standard downspout on a single-story run. |
| Half-round or copper-profile gutter | Starting at $18/linear ft | Includes half-round profile and strap hangers, priced higher for copper and specialty metal matching. |
| Heated cable in trough and downspout | Starting at $14/linear ft | Includes self-regulating cable, thermostat, and wiring; priced by run length and number of downspouts. |
| Downspout rerouting and buried extension | Starting at $22/linear ft | Includes 3x4 downspout, trenching, and pop-up emitter to move water off clay foundations. |
| Complex or multi-story job | On estimate | Three-story Tudors, cut-up rooflines, and lift access need an on-site look before a number is given. |
| Estimate | Free | Response within 24 hours at (216) 294-3900, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial metal roof inspection and estimate | Free estimate | Full roof and structure walk, written scope, no obligation to book. |
| Exposed-fastener agricultural roof | Starting at $4.50 per sq ft | Ribbed or corrugated panels, new fasteners, standard trim, tear-off extra. |
| Standing seam commercial roof | Starting at $9.00 per sq ft | 24 or 26 gauge concealed-fastener panels, underlayment, custom flashing. |
| Insulated panel system | On estimate | Foam-core panels, thermal spec and structural review require on-site measurement. |
| Travel | Included | in Cleveland and surrounding counties, no separate call-out or mileage fee. |
| Emergency leak response | Starting at $350 | Temporary seal and leak source diagnosis, credited toward permanent repair. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Cleveland usually want the same thing: a straight answer about what their roof actually needs. Cleveland Metal Roofing is the local crew that gives it. We handle metal roof installation, replacement, re-roofs, and repairs across the region, from steep gabled doubles in Tremont and Ohio City to the low-slope Capes and ramblers that fill Lakewood, Parma, and Euclid. Our network of licensed, bonded, and insured local contractors works the same streets you do.
This is demanding country for any roof, and it is why we are specific about what we recommend. Lake-effect snow loads, ice dams at the eaves, freeze-thaw cycling, and summer hail all work on the same assembly, and much of the housing stock in Shaker Heights, Cleveland Heights, and the surrounding suburbs is old enough that decking and flashing have stories to tell. We also see a large stock of aging screw-down roofs whose fasteners are reaching the end of their service life. If you want a straight read on yours, reach out for a free estimate.
Most metal roof leaks we chase in Northeast Ohio are not mysterious. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once that seal fails, water walks in at every screw. The next most common: seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys. Wind-lifted panels after a lake gust, and punctures from fallen limbs, round out the list. None of these are rare, and none get better on their own.
What makes metal roof leak repair urgent is how far the water travels. It tracks along purlins and decking well away from the entry point, so the stain on your ceiling is rarely where the roof is open. Left alone, that means rotted sheathing and saturated insulation. We find the actual entry, not just the symptom.
Here is the honest call on repair versus replace. If the panels are sound and the problem is fasteners and seals, a full screw replacement and re-fastening often restores a watertight roof for a fraction of replacement cost. If panels are perforated, seams are failing broadly, or the deck is compromised, we will tell you that too. Call (216) 294-3900 and we will walk you through which side of that line your roof is on, with no pressure and no sales script.
We install the full range of metal systems, and we match the system to the house rather than the other way around. Standing Seam Metal Roofing is the premium choice: concealed clips, no exposed fasteners, clean lines that suit Victorian and Tudor homes. Corrugated & Ribbed Panel Roofing is the economical workhorse, right for barns, workshops, and cabins. Then there is Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The short honest comparison: standing seam costs more up front and has no exposed screws to maintain; screw-down costs less and needs its fasteners serviced over its life. Both are legitimate. Retrofit over existing shingles is a real option when the deck is sound, and a tear-off is the right call when it is not. We will tell you which applies to your roof.
Metal roof pricing in Cleveland is usually quoted per square foot for installations, while repairs are often flat-rate. What moves the number: the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We quote typical ranges rather than fixed figures because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer.
For a clearer picture of how systems compare, see our pricing page, then request a free estimate or free roof inspection. You will get a written scope and a straight recommendation, including when the cheaper option is the right one.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise a claim will be approved. We document what we see and leave the coverage call where it belongs.
On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color. We do not treat any of this as advice, only as information. Requirements vary, so always verify with the Cleveland building or planning department before starting your project. Questions in the meantime? Contact us.
Ready to get started? Cleveland Metal Roofing serves in Cleveland and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Cleveland · Response within 24h · No commitment · ☎ (216) 294-3900
Your Free Quote Request